=====HOMESTEAD LUBRICATED PLUG VALVES=====

Homestead Figure 602-G

100% Pipe Area & 

Standard Opening

Semi-Steel

Straightway - Worm & Gear Operated Rectangular Portt

200 lb. WOG

150 lb SWP

Test: Air under water 200 p.s.i.g.

NOTE: Valves 14" and larger are figure 622G. Pressure rating is 150 CWP; Hydrostatic test pressure is 300 PSIG

 

 

 

Fig. 602-G - Semi-Steel, Screwed

DIMENSIONS

SIZE - INCHES
  4" 5" 6" 8" 10"± 12"± 14"± 16"± 18"±
Face to Face A 9 10 101/2 111/2 13 14 15 30 34
Flange Diameter G 9 10 11 131/2 16 19 21 231/2 25
Flange Thickness E 15/16 15/16 1 11/8 13/16 11/4 1 3/8 1 7/16 1 9/16
Number of drilled holes in flange Y 4 4 4 4 8 8 8 16 16
Number of tapped holes in flange X 4 4 4 4 4 4 4 - -
Center to Top of Stem (Fig. 611-A) D 115/16 13  /8 14 11/16 14 11/16 17 7/8 18 3/8 20 9/16
Length of Lubricant Screw L 3 5/8 4 1/2 4 1/2 4 1/2 4 1/2 4 1/2 4 1/2
Lubricant Stick Diameter - 1/2 5/8 5/8 5/8 5/8 5/8 5/8
Center of port to center of Shaft H 7 1/2 9 9 25/32 11 13 15/16 13 15/16 15 7/8 16 5/16 18 7/16
Center of valve to center of Handwheel K 4 5/16 6 5/8 6 5/8 6 5/8 7 5/8 7 5/8 11 9/16 11 9/16 11 9/16
Center of Port to Bottom C 6 1/2 7 9/16 8 5/8 9 15/16 11 9/16 11 3/4 131/4 15 16 15/16
Center of Body to Handwheel O 8 1/4 10 5/8 10 5/8 10 5/8 13 1/8 13 1/8 15 9/16 16 16
Handwheel Diameter Q 18 18 18 18  27 27 27 38 38
Turns to open valve - 7 1/2 9 9 9 9 1/2 9 1/2 17 17 17
Weight, pounds - 123 218 245 349 525 708 - - -

± These sizes have reduced openings, less than 100% pipe area.

Face to face dimensions are in accordance with ANSI B16.10. Drilling other than standard is extra. Prices include drilling, and no reduction is made for valves not drilled.

Sides of valve bodies may be tapped for by-pass lines.

Combination Buttonhead Fitting and Lubricant Screw (page 26) is standard on all valves.
Site designed and built by Olson Technologies, Inc.
Copyright © 2000 [Homestead Valve]. All rights reserved.
Revised: June 22, 2005 .