=====HOMESTEAD LUBRICATED PLUG VALVES=====
Fig. 612-G
|
200lb. WOG 150lb. SWP Test: Air under water 200 p.s.i.g. Hydrostatic 400 p.s.i.g. NOTE: Valves 14" and larger are figure 612-G. Pressure rating is 150 CWP; Hydrostatic test pressure is 300 PSIG |
|
Standard Opening Semi-Steel Straightway - Worm & Gear Operated Rectangular Port |
Fig. 612G - Semi-Steel, Screwed
|
DIMENSIONS |
SIZE - INCHES |
|||||||||
| 6" | 8" | 10" | 12" | 14" | 16" | 18" | 20" | 24" | ||
| Face to Face | A | 10 1/2 | 11 1/2 | 13 | 14 | 15 | 30 | 34 | 36 | 42 |
| Flange Diameter | G | 11 | 13 1/2 | 16 | 19 | 21 | 23 1/2 | 25 | 271/2 | 32 |
| Flange Thickness | E | 1 | 11/8 | 1 3/16 | 11/4 | 13/8 | 17/16 | 19/16 | 111/16 | 2 |
| Number of drilled holes in flange | Y | 6 | 6 | 10 | 10 | 8 | 16 | 16 | 20 | 20 |
| Number of tapped holes in flange | X | 2 | 2 | 2 | 2 | 2 | 4 | - | - | - |
| Center to Top of Stem | D | 9 5/16 | 11 5/8 | 1215/16 | 14 1/2 | 15 15/16 | 18 7/8 | 18 3/8 | 20 9/16 | 23 9/16 |
| Length of Lubricant Screw | L | 3 5/8 | 4 1/2 | 4 1/2 | 4 1/2 | 4 1/2 | 4 1/2 | 4 1/2 | 4 1/2 | 4 1/2 |
| Lubricant Stick Diameter | - | 1/2 | 5/8 | 5/8 | 5/8 | 5/8 | 5/8 | 5/8 | 5/8 | 5/8 |
| Center of Port to Center of Shaft | H | 8 3/16 | 10 3/16 | 11 13/32 | 13 | 14 5/16 | 16 7/8 | 16 5/16 | 18 7/16 | 21 7/16 |
| Center of Port to Bottom | C | 5 13/16 | 6 3/4 | 8 3/4 | 10 | 113/8 | 12 1/4 | 15 | 16 15/16 | 19 15/16 |
| Center of valve to center of Handwheel | K | 4 5/16 | 6 5/8 | 6 5/8 | 6 5/8 | 7 5/8 | 11 9/16 | 11 9/16 | 11 9/16 | 11 9/16 |
| Center of Body to Handwheel | O | 8 1/4 | 10 5/8 | 10 5/8 | 12 1/4 | 13 1/8 | 15 9/16 | 16 | 16 | 18 1/2 |
| Handwheel Diameter | Q | 18 | 18 | 18 | 18 | 27 | 27 | 38 | 38 | 38 |
| Turns to open valve | - | 7 1/2 | 9 | 9 | 9 | 9 1/2 | 17 | 17 | 17 | 17 |
| Weight, pounds | - | 143 | - | 340 | 539 | 600 | 1321 | 1736 | 2376 | 2810 |
| ±±Fig. 622-A has a long face
to face dimension.
± These sizes have reduced openings, less than 100% pipe area. *12" and larger sizes are for power unit operation only. Face to face dimensions are in accordance with ANSI B16.10. Drilling other than standard is extra. Prices include drilling, and no reduction is made for valves not drilled. Sides of valve bodies may be tapped for by-pass lines. Combination Buttonhead Fitting and Lubricant Screw (page 26) is standard on all valves. |