=====HOMESTEAD LUBRICATED PLUG VALVES=====

Homestead Figure 641

Figure 642

     Diamond Port 

Standard Opening

Full port body with diamond port plug

Straightway - Wrench Operated Semi-Steel

200 lb. WOG

150 lb SWP

Test: Air under water 200 p.s.i.g.

 

 

 

 

 

 

 

 

 

 

 

 

Fig. 641 - Screwed                                                                                      Fig. 642 - Flanged

DIMENSIONS

SIZE - INCHES
  1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" *4" *5" *6" 8" 10"
End to End A 3 3/4 3 3/4 4 1/4 5 5 6 6 3/4 7 5/8 10 - - - -
Face to Face A - - 5 1/2 6 6 1/2 7 7 1/2 8 9 10 10 1/2 11 1/2 13
Flange Diameter G - - 4 1/4 4 5/8 5 6 7 7 1/2 9 10 11 13 1/2 16
Flange Thickness E - - 7/16 1/2 9/16 5/8 11/16 3/4 15/16 15/16 1 1 1/8 1 3/16
Number of drilled holes Y - - 4 4 4 4 4 4 8 4 4 4 8
Number of tapped holes X - - - - - - - - - 4 4 4 4
Center to Top of Stem D 2 29/32 2 29/32 3 5/16 4 4 5 1/8 5 13/32 6 17/32 7 3/4 8 11/16 9 15/32 12 14 11/16
Length of Lubricant Screw L 1 9/16 1 9/16 1 9/16 1 9/16 1 9/16 2 1/2 2 1/2 2 1/2 3 5/8 3 5/8 3 5/8 4 1/2 4 1/2
Lubricant Stick Diameter - 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 5/8 5/8
Standard Wrench Size - F F G G G E E L N N N P P
Center of Port to Bottom C 3 7/32 3 7/32 3 7/32 4 1/8 4 1/8 5 1/32 5 11/32 6 13/32 7 19/32 8 5/8 9 5/8 9 15/16 11 3/4
Dimension. of Square on Stem H 25/32 25/32 29/32 29/32 29/32 1 7/16 1 7/16 1 1/2 2 2 2 2 7/16 2 7/16
Extreme width of Screwed Body R 2 5/8 2 5/8 2 7/8 3 5/8 3 5/8 4 3/8 5 6 1/4 7 1/4 - - - -
Extreme width of Flanged Body R - - 4 1/4 4 5/8 5 6 7 7 1/2 9 10 11 13 1/2 17
Weight, pounds - Screwed Body - 4 1/2 4 1/2 6 10 10 18 1/2 26 3/4 43 75 - - - -
Weight, pounds - Flanged Body - - - - - 14 1/2 23 1/2 36 1/4 50 85 132 168 275 410

*These sizes available with enclosed manual gear actuator.

8" and 10" sizes are Fig. 642-A and have bolted bonnets.

Optional dial indicators are available on all valves. Specify if required.

Face to face dimensions are in accordance with ANSI B16.10. 

Flanges are drilled to 125 pound ANSI B16.1. Drilling other than standard is extra. Prices include drilling, and no reduction is made for valves not drilled.

Combination Buttonhead Fitting and Lubricant Screw (page 26) is standard on all valves.
Site designed and built by Olson Technologies, Inc.
Copyright © 2000 [Homestead Valve]. All rights reserved.
Revised: June 22, 2005 .