HIGH-HEAD EXTENSIONS

High-Head Extensions are available for the control of wrench-operated and worm and gear operated Homestead Lubricated Plug valves installed below ground or floor level. Extension permits valve operation from above by tee-handled socket wrench, lever, or hand-wheel. The high-head extension includes the lube extension pipe and the stem extension pipe. Valve may be lubricated from the operation level by hand or pressure gun. An alternate lubrication system is included with the worm and gear extension assembly only. When ordering High-Head extensions, specify size and figure number of valve, and give dimension "A" (distance from ground or floor level to center of valve.

LOW-HEAD EXTENSIONS

Low-Head Extensions are available for control of wrench-operated or worm and gear operated Homestead Lubricated Plug Valves installed below ground or floor level. A tee-handled, hollow-stemmed socket wrench with adapter is used to operate the valve, and lubrication is done from above ground by means of a lubrication extension pipe. Lubricant fitting in upper end of extension pipe permits lubrication by hand or pressure gun. In ordering Low-Head Extension, please give size and figure number of valve, and Dimension "A" (distance from floor or ground to center of valve.

FLOOR STANDS

A floor stand with an indicating device to show whether valve is open or closed can be fitted to all wrench-operated and worm and gear operated Homestead Lubricated Plug Valves. If it is impossible to line up floor stand and valve, a floor stand with universal joint is available. Floor stands may be had in welded construction as shown in sketch, or as an integral casting. When ordering floor stands, give valve size, figure number and Dimension "A". For floor stands with universal, give dimensions A, H, and I

ADAPTER SQUARE

Adapter square dimension is 2" for full port valves up to 6" and venturi type to 8". All larger size valves require a 2 ⁷/₁₆" adapter square.